To configure Htek provisioning

1. Add a server for your Enswitch system to the Htek RPS server. Set the URL to be <URL of Enswitch>/provision/htek/. For example, "https://enswitch.example.com/provision/htek/".
2. Add "htek" to the "Provision models" setting under System » Configuration in Enswitch. If there is already a setting, add a ",htek" to the end - for example "snom,htek".
3. Set the "Provision Htek RPS username", "Provision Htek RPS password", and "Provision Htek RPS redirect server" settings under System » Configuration. The redirect server should be the same as the name of the server you configured in RPS.
4. Wait one minute for these setting to take effect.
5. Go to Features » Provisioning, and edit the Htek template to suit.
6. Edit a telephone line on the Enswitch web, and set the MAC address. If there are multiple lines on the same physical telephone, the accounts can be suffixed with "-1", "-2", etc. For example:

   00:11:22:33:44:55-1

   for the first line on physical telephone 00:11:22:33:44:55. When done, save the telephone line.
7. Restart the handset.